ISO CE MSDS Motorcycle Lithium Battery With High Energy Density
Quick Detail:
1. Low self-discharge rate: less than 5%
2. High security: no explosion probability
3. Shape free: any shape can be designed, customized made
4.High energy density,high and stable operation voltage,with average voltage over 3.2V
5.Produced with automatic equipments and divided by automatic grouping system,ensure the battery excellent consistency.
6.Eco-friendly with TS10949 system,compliance with CE,ETL,UN,CE and Rohs directions.
Description:
60V 20ah lithium ion battery for electric scooter/motorcycle (lifepo4 battery)
Compared with the same capacity lead-acid battery, LiFePO4 battery is 1/3 smaller in size, 2/3 lighter in weight, 5 times longer in cycle life, more economic and eco-friendly.
LiFePO4 battery replacing Lead acid battery is an inevitable trend.
Compared with same capacity Li-NixCoyMnz battery, LiFePO4 battery is 2.5 times longer in cycle life, also most the same in weight & size.
Basic knowledge:
Lithium ion battery, classified by the anode material, can be divided into li-MH,Li-Co2, Li-NixCoyMnz, and Li-FePO4, etc.
Classified by the battery shell, can be divided into plastic shell, stell/iron shell and aluminum shell.
All these lithium ion batteries have their own advantages. The technical data of their comparative performances is as follows:
| Different Lithium Battery Material Comparision Table |
| NO. |
Parameters |
Li-Co2 |
Li-NiCoMn |
Li-MnO2 |
LiFePO4 |
| 1 |
Energy density (g/cm3) |
2.8~3.0 |
2.0~2.3 |
2.2~2.4 |
1.0~1.4 |
| 2 |
Specific area (m2/g) |
0.4~0.6 |
0.2~0.4 |
0.4~0.8 |
12~20 |
| 3 |
Capacity density (Ah/kg) |
135~140 |
155~165 |
100~115 |
130~140 |
| 4 |
Voltage |
3.7 |
3.6 |
3.6 |
3.2 |
| 5 |
Cycle life |
＞300 |
＞800 |
＞500 |
＞2000 |
| 6 |
Transition metal |
Poor |
Poor |
Rich |
Very rich |
| 7 |
Material cost |
Very high |
High |
Cheap |
Cheap |
| 8 |
Environmental performance |
Contain Co |
Contain Co & Ni |
Non-toxic |
Non-toxic |
| 9 |
Safety performance |
Bad |
Good |
Better |
Excellent |
| 10 |
Application area |
Small battery |
Small battery Small power battery |
Power battery |
Power battery Large capacity power supply |
Applications:
electric bike, electric wheelchair, electric scooter, electric motorcycle, golf cart, electric robot, vacuum cleaner, electric mower, wind/solar energy storage ...
Specifications:
|
Battery Material
|
LiFePO4
|
|
Nominal Voltage
|
60V
|
|
Rated Capacity
|
20Ah
|
|
Pack Dimension
|
250*130*230mm
|
|
Internal Impedance
|
≤100mΩ
|
|
Charge Voltage
|
46~73V
|
|
Charge Current
|
4A~10A
|
|
Rated Discharge Current
|
20A
|
|
Max.Discharge Current
|
50A
|
|
Charging Mode
|
CC/CV
|
|
Pack weight
|
About 13kg
|
|
Over Current Protection
|
Customized design
|
|
Cycle Life
|
About 1200 Cycles
|
|
Charge Temperature
|
0-45℃
|
|
Discharge Temperature
|
-20-55℃
|
|
Range
|
80Km(motor 500W)
|
Product advantages:
1. Long cycle life (2000 cycles) is several times greater than Ni-MH, Ni-Cd or lead-acid.
2. No toxic, or polluting material(such as lead, cadmium, mercury) is contained in lithium battery, which is a kind of green battery.
3. High safety. LiFePO4 is an intrinsically safer cathode material than Lithium-ion since exothermic reactions can not occur in batteries based on this material LiFePO4 cells do not incinerate or explode under extreme conditions.
4. Good performance in high-current discharge cycles. We can design different capacity and size according to your demands.
For many applications, our battery systems result in significantly lower total cost of ownership over lead acid because lighter-weight, longer-life batteries means fewer replacements, reduced maintenance and service costs, less shipping and material handling costs, and lower total inventory carrying costs.
Company advantages:
1. Advanced polymer lithium-ion battery technology system ensure the correct technical direction and advanced leading technology
2. Excellent procedure quality tracking control system ensure HKNE battery’s excellent performance and good consistency.
3. One-stop lithium battery system solutions. HKNE’s research and development team include electronic engineer, mechanical engineer, structure engineer, whom could offer our clients one stop solutions including BMS, charger, battery pack structure, and overall applications.
4. Intimate and in time reacting service system. We always try to offer more than expected, do more than required.
